Description
Waterproof Render Fine is highly adhesive, flexible, waterproof and durable, and provides a protective and attractive coating to brick, block and concrete. This render coat is used extensively in the repair of heritage buildings, and a wide range of other applications including marine structures, sea walls, water tanks and bridge repairs. 1.12F provides a breathable, but waterproof rendered fine finish to the external walls of houses and commercial buildings. It can be pump/spray applied where large enough volumes permit.
Yield: 20kg yields 9.6ltrs at 13.5% water content (27MPa)
Compressive Strength:
Days: 7 28
MPa: 22.5 27
Special properties:
- Can be pumped/sprayed and or hand placed
- High adhesion >1.5MPa
- Non-shrink, non-cracking and shrinkage compensated.
- Can be placed from 25 mm to a feather edge.
- High flexibility
- Waterproof from time of initial set
- Suitable for potable water applications
- Non-toxic
- Ideal for repairs
Uses:
- Can be pumped/sprayed and or hand placed
- High adhesion >1.5MPa
- Non-shrink, non-cracking and shrinkage compensated.
- Can be placed from 25 mm to a feather edge.
- High flexibility
- To render concrete, brickwork, blockwork, masonry and stone.
- To repair and protect weak or damaged concrete or brick surfaces.
- Bridge repairs
- Projects that come into contact with water.
- Marine structure repairs.
- Seawall repairs.
- To produce weatherproof and durable coatings to external
walls of offices, factories, warehouses and buildings. - To produce attractive and ascetically pleasing finishes to
houses, buildings and concrete structures. - Water tank and reservoir lining.
