1.08 Super Flow Grout

1.08 SUPER FLOW GROUT is a specially designed Portland cementitious 90MPa grout that is used for applications where a very flowable high strength grout is required. Ideal for the filling and sealing of cracks and fine voids. Supplied in 25kg tri-wall plastic lined paper bags.
Yield: 25 kg yields 12.5ltrs of pourable grout at 14% water content (90MPa), 13 ltrs of fluid grout at 16% water content (80MPa).
Minimum Compressive Strength:
Water/ Powder Ratio    14%                  16%
                       MPa          MPa
        Day:  1         25            20
        Day:  7         70            60
        Day:  28        90            80
USES:
  • Ideal for narrow grouting applications and long Drossbach ducts.
  • Crack injection applications.
  • Between construction joints, precast concrete panels, beams and closely spaced steel reinforcing.
  • Post-tensioned, prestressed concrete cables and ducts.
  • Crack repair on bridge structures.
  • Holding down bolts, bars and rods.
  • Under base plates with clearances of 10mm or less.
  • To penetrate and seal fissures in rock, masonry, brick and concrete.
  • Underpinning and stabilizing foundations, loose floor and road slab.